Make it better.

Steam Traps and Air Eliminators

ABB positioner type TZIDC

Go to Product

UD-720

The UD-720 is a programmable digital panel display used for the measurement of standard sensor and analog signals applied in automation. It is ideally suited for use with a range of instrumentation such as pressure transmitters, temperature probes and TDS controllers.
Go to Product

TRPT1

The TRPT1 Pt100 resistance temperature sensors are specially designed for general industrial use. The sensing element is an RTD three wire device according to EN 60751 Class A.
Go to Product

SPS-21

The ADCATROL SPS-21 conductivity probe is used to measure the conductivity (TDS) of the superheated water of boilers or condensate. The probe is used in conjunction with an ADCATROL BCS-211 controller and VPC series blowdown valve.
Go to Product

SPS-33

The ADCATROL SPS-33 conductivity probe is used to measure the conductivity (TDS) of the superheated water of boilers or condensate. The probe is used in conjunction with an ADCATROL BCS-211 controller and VPC series blowdown valve.
Go to Product

ADCA TDS Controller for Steam Generators Series BCS-211

Go to Product

TR Series

The TR25 series of temperature regulators were designed for direct acting temperature control systems where the valve closes on temperature rise. They are single seated and are intended to be coupled with T series thermostat models T.205 and T.405. The liquid filling the thermostat expands when the temperature of the fluid being heated rises, closing the valve. These valves are used for controlling temperature in central and district heating systems, heat exchangers and other HVAC and industrial applications
Go to Product

ADCA Linear Electric Actuators Series AVF234S / AVM234S

Go to Product

ADCA Linear Electric Actuator with Fail-Safe Function

Go to Product

ADCA Linear Electric Actuators

Go to Product

VPC26

The ADCATrol VPC26 is a control valve specially designed for this purpose and features a multi-stage trim to progressively reduce the energy of the fluid. This makes it ideal for discharge of boiler blowdown at high differential pressures where flashing is a concern
Go to Product

VPA26/2

The VPA26/2 blowdown valve series were specially designed for application on steam boilers, to remove sludge sediments which naturally settle on the bottom of the boiler. These intermittent valves operate manually or automatically with timed control. This valve is available with a diaphragm actuator and/or manual operation lever
Go to Product

PV403 Series

Go to Product

V253

The ADCATrol V253 is a series of three-way globe control valves designed to ensure accurate control in mixing or diverting general service applications. These valves can be assembled with pneumatic, hydraulic or electric actuators and used with the most common process fluids such as water, superheated water, thermal oil, steam, air, gas and other non corrosive fluids.
Go to Product

PAV21 Pneumatic angle type interception valve

Go to Product

PPV25 Series

Go to Product

PV25 | ON – OFF

Go to Product

V25/2 EN

The ADCATrol V25/2 is a series of single seated, two-way globe valves designed for process engineering and industrial applications, where events such as erosion, cavitation or flashing may occur. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
Go to Product

V16/2 Series

The ADCATrol V16/2 is a series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
Go to Product

ADCA Pressure Reducing Valve Series P7

Go to Product

RP45 Series

Go to Product

ADCA Vent Valves Series BDVL – AFZ

Go to Product

ADCA Noise Diffusers

Go to Product

VB21M

The VB21 vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume, such as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.
Go to Product

ADCA Condensate Drain Valve Series CDV32

Go to Product

UBS90

The UBS90 series bimetallic steam traps and air eliminators, completely in stainless steel, are maintenance free and sealed traps. Simple and robust, they are recommended for drip service, steam tracing applications and where condensate sensible heat can be recovered.
Go to Product

UCX90

The UCX series pipeline connectors are used in steam systems where a simple and economic maintenance program is desired. Typical installations are drip service on steam lines, tracing applications and small process equipment. The four-bolt flange connector allows for fast trap replacement without disturbing the pipelines.
Go to Product

UBS20

The UBS20 series bimetallic steam traps and air eliminators, completely in stainless steel, are maintenance free and sealed traps. Simple and robust, they are recommended for drip service, steam tracing applications and where condensate sensible heat can be recovered. These traps fit the UCX universal connectors and CTS4U compact stations
Go to Product

UTS22

UTS22-serien af termostatiske dampfælder og lufteliminatorer, fuldstændig i rustfrit stål, er vedligeholdelsesfrie og tætnede fælder. De er specifikt designet til at blive brugt på procesudstyr som kedelkomfurer, sterilisatorer, fødevare-, kemisk- og vaskeriudstyr. Disse fælder passer til UCX universelle forbindere og CTS4U kompakte stationer.
Go to Product

UFS32

The UFS32 series float and thermostatic (integral air vent) steam traps, completely in stainless steel, are maintenance free and sealed. They are specifically designed to work with low and medium pressure steam and all types of heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels and all the applications where continuous drainage is essential. These traps fit the UCX universal connectors and CTS4U compact stations.
Go to Product

UDT46

The UDT46 series thermodynamic steam traps, completely in stainless steel, are excellent for high pressure systems, including steam tracing applications. The insulation cover ensures a consistent operation and makes them particularly suitable for applications where the weather conditions, such as rain and wind, may affect the normal operation. These traps have only one moving part and offer a wide operating range, without adjustment.
Go to Product

ADCA Compact Trapping Station

Go to Product

UCX41

The UCX series pipeline connectors are used in steam systems where a simple and economic maintenance program is desired. Typical installations are drip service on steam lines, tracing applications and small process equipment. The two-bolt flange connector allows for fast trap replacement without disturbing the pipelines.
Go to Product

ADCA Bimetallic Steam Traps Series BM–HC

Go to Product

ADCA Bimetallic Steam Traps / Air Eliminators Series BSS20

Go to Product

ADCA Bimetallic Steam Traps Series BM140

Go to Product

ADCA Bimetallic Steam Traps Series BM80

Go to Product

ADCA Bimetallic Steam Traps Series BM45

Go to Product

ADCA Bimetallic Steam Traps Series BM35

Go to Product

ADCA Bimetallic Steam Traps Series BM32

Go to Product

ADCA Bimetallic Steam Traps Series BM24

Go to Product

ADCA Bimetallic Steam Traps Series BM20

Go to Product

TSW22

The TSW22 all stainless steel thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipmen
Go to Product

TH (Multi-thermostat)

The TH35 series thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.
Go to Product

TH21

The TH21 series thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment
Go to Product

TH32

The TR25 series of temperature regulators were designed for direct acting temperature control systems where the valve closes on temperature rise. They are single seated and are intended to be coupled with T series thermostat models T.205 and T.405. The liquid filling the thermostat expands when the temperature of the fluid being heated rises, closing the valve. These valves are used for controlling temperature in central and district heating systems, heat exchangers and other HVAC and industrial applications
Go to Product

TSS22

The TSS22 series of balanced pressure thermostatic steam traps and air vents are specifically designed for use on process equipment such as sterilizers and other autoclaves, kettle cookers, food, chemical and laundry equipment. Their small size makes them ideal specially when a fully stainless steel steam trap is required.
Go to Product

TH13A

The TH13A series thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipment and, specially, as air vents.
Go to Product

ADCA Inverted Bucket Steam Traps Series IB30S DN40-50

Go to Product

ADCA Inverted Bucket Steam Traps Series IB36S

Go to Product

ADCA Inverted Bucket Steam Traps Series IB30S

Go to Product

ADCA Inverted Bucket Steam Traps Series IBB12

Go to Product

ADCA Inverted Bucket Steam Traps Series IB12

Go to Product

ADCA Float and Thermostatic Steam Traps Series FLT151

Go to Product

ADCA Float and Thermostatic Steam Traps Series FLT80

Go to Product

ADCA Float and Thermostatic Steam Traps Series FLT50-FLT65S

Go to Product

ADCA Float and Thermostatic Steam Traps Series FLT151

Go to Product

ADCA Float and Thermostatic Steam Traps FLT Line – Stainless Steel

Go to Product

ADCA Float and Thermostatic Steam Traps Series FLT32 – Carbon Steel

Go to Product

ADCA Float and Thermostatic Steam Traps Series FLT17LC – SG Iron

Go to Product

ADCA Thermodynamic Steam Traps Series DT46

Go to Product

ADCA Thermodynamic Steam Traps Series DT42/2

Go to Product

ADCA Thermodynamic Steam Traps Series DT40/2

Go to Product

Electric steam trap EST

Electronic Steam Trap
Go to Product