All Products
Found 219 Results
Page 1 of 0
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Go to Product
Page 1 of 0
Page 1 of 0
UD-720
The UD-720 is a programmable digital panel display used for the measurement of standard sensor and analog signals applied in automation. It is ideally suited for use with a range of instrumentation such as pressure transmitters, temperature probes and TDS controllers.
TRPT1
The TRPT1 Pt100 resistance temperature sensors are specially designed for general industrial use. The sensing element is an RTD three wire device according to EN 60751 Class A.
SPS-21
The ADCATROL SPS-21 conductivity probe is used to measure the conductivity (TDS) of the superheated water of boilers or condensate. The probe is used in conjunction with an ADCATROL BCS-211 controller and VPC series blowdown valve.
SPS-33
The ADCATROL SPS-33 conductivity probe is used to measure the conductivity (TDS) of the superheated water of boilers or condensate. The probe is used in conjunction with an ADCATROL BCS-211 controller and VPC series blowdown valve.
M3HP
M3HP three piece body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as a control valve and should only be used as an isolating valve, fully open or fully closed. The product is mainly designed for the pharmaceutical, biotech, semiconductor, cosmetics, fine chemical, food and beverage industries.
VB16C
The VB16C vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume, such as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.
TSS6A
The TSS6A all stainless steel thermostatic steam traps and air vents are specifically designed for use in reactors, sterilizers and distribution lines in clean and pure steam systems. Their small size makes them ideal for use with a wide variety of these equipment.
TSS7
The TSS7 all stainless steel thermostatic steam traps and air vents are specifically designed for use in reactors, sterilizers and distribution lines in clean and pure steam systems. Their small size makes them ideal for use with a wide variety of these equipment.
TR Series
The TR25 series of temperature regulators were designed for direct acting temperature control systems where the valve closes on temperature rise. They are single seated and are intended to be coupled with T series thermostat models T.205 and T.405. The liquid filling the thermostat expands when the temperature of the fluid being heated rises, closing the valve. These valves are used for controlling temperature in central and district heating systems, heat exchangers and other HVAC and industrial applications
VPC26
The ADCATrol VPC26 is a control valve specially designed for this purpose and features a multi-stage trim to progressively reduce the energy of the fluid. This makes it ideal for discharge of boiler blowdown at high differential pressures where flashing is a concern
VPA26/2
The VPA26/2 blowdown valve series were specially designed for application on steam boilers, to remove sludge sediments which naturally settle on the bottom of the boiler. These intermittent valves operate manually or automatically with timed control. This valve is available with a diaphragm actuator and/or manual operation lever
V253
The ADCATrol V253 is a series of three-way globe control valves designed to ensure accurate control in mixing or diverting general service applications. These valves can be assembled with pneumatic, hydraulic or electric actuators and used with the most common process fluids such as water, superheated water, thermal oil, steam, air, gas and other non corrosive fluids.
V25/2 EN
The ADCATrol V25/2 is a series of single seated, two-way globe valves designed for process engineering and industrial applications, where events such as erosion, cavitation or flashing may occur. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
V16/2 Series
The ADCATrol V16/2 is a series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
VB21M
The VB21 vacuum breakers are simple and reliable devices that automatically relieve or “break” an unwanted vacuum condition, restoring the atmospheric pressure. This device is particularly suitable for steam heated units of small and medium volume, such as heat exchangers, heating coils, calorifiers, jacketed kettles, steam boilers, etc.
UBS90
The UBS90 series bimetallic steam traps and air eliminators, completely in stainless steel, are maintenance free and sealed traps. Simple and robust, they are recommended for drip service, steam tracing applications and where condensate sensible heat can be recovered.
UCX90
The UCX series pipeline connectors are used in steam systems where a simple and economic maintenance program is desired. Typical installations are drip service on steam lines, tracing applications and small process equipment. The four-bolt flange connector allows for fast trap replacement without disturbing the pipelines.
UBS20
The UBS20 series bimetallic steam traps and air eliminators, completely in stainless steel, are maintenance free and sealed traps. Simple and robust, they are recommended for drip service, steam tracing applications and where condensate sensible heat can be recovered. These traps fit the UCX universal connectors and CTS4U compact stations
UTS22
UTS22-serien af termostatiske dampfælder og lufteliminatorer, fuldstændig i rustfrit stål, er vedligeholdelsesfrie og tætnede fælder. De er specifikt designet til at blive brugt på procesudstyr som kedelkomfurer, sterilisatorer, fødevare-, kemisk- og vaskeriudstyr. Disse fælder passer til UCX universelle forbindere og CTS4U kompakte stationer.
UFS32
The UFS32 series float and thermostatic (integral air vent) steam traps, completely in stainless steel, are maintenance free and sealed. They are specifically designed to work with low and medium pressure steam and all types of heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels and all the applications where continuous drainage is essential. These traps fit the UCX universal connectors and CTS4U compact stations.
UDT46
The UDT46 series thermodynamic steam traps, completely in stainless steel, are excellent for high pressure systems, including steam tracing applications. The insulation cover ensures a consistent operation and makes them particularly suitable for applications where the weather conditions, such as rain and wind, may affect the normal operation. These traps have only one moving part and offer a wide operating range, without adjustment.
UCX41
The UCX series pipeline connectors are used in steam systems where a simple and economic maintenance program is desired. Typical installations are drip service on steam lines, tracing applications and small process equipment. The two-bolt flange connector allows for fast trap replacement without disturbing the pipelines.
TSW22
The TSW22 all stainless steel thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipmen
TH (Multi-thermostat)
The TH35 series thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment.
TH21
The TH21 series thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment
TH32
The TR25 series of temperature regulators were designed for direct acting temperature control systems where the valve closes on temperature rise. They are single seated and are intended to be coupled with T series thermostat models T.205 and T.405. The liquid filling the thermostat expands when the temperature of the fluid being heated rises, closing the valve. These valves are used for controlling temperature in central and district heating systems, heat exchangers and other HVAC and industrial applications
TSS22
The TSS22 series of balanced pressure thermostatic steam traps and air vents are specifically designed for use on process equipment such as sterilizers and other autoclaves, kettle cookers, food, chemical and laundry equipment. Their small size makes them ideal specially when a fully stainless steel steam trap is required.
TH13A
The TH13A series thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipment and, specially, as air vents.
Shut-off Double Seat Mixproof Valve INNOVA S
The INNOVA S-type valve is a pneumatic shut-off double seat valve for hygienic applications. The leackage chamber, under atmospheric pressure, situated between the two seats ensures a safe interface between the two liquids, one of which is usually a CIP solution (cleaning agent).
Shut-off Double Seat Mixproof Valve INNOVA P
The INNOVA P-type valve is a pneumatic shut-off double seat valve for hygienic applications. The leackage chamber, under atmospheric pressure, situated between the two seats ensures a safe interface between the two liquids, one of which is usually a CIP solution (cleaning agent).
Tank Bottom Double Seat Valve INNOVA T
The INNOVA T mixproof valve is a double seat pneumatic shut-off valve designed specifically for use in tanks and vats used for hygienic applications. A leak detection chamber under atmospheric pressure formed between both seats ensures that two different products are safely separated, one of which is usually CIP (cleaning agent)
Sanitary Double Seal Mixproof Valve
The INNOVA D-type valve is a pneumatic shut-off single seat valve with two seals that, by means of a leakage chamber under atmospheric pressure formed between the two seals, enables a safe separation of two different products, one of which is usually CIP (cleaning medium). Compressed air is simultaneously applied to the actuator and to the leakage valves to prevent leakage through the leakage valve when the valve opens. Valve open - leakage valves closed / valve closed - leakage valves open. The leakage chamber can be cleaned through one of the two available leakage valves.(gennem en spraykugle).
Tank Bottom Single Seat Valve INNOVA F
The INNOVA F valve is a shut-off single seat valve designed specifically for installation at the tank bottom for use in hygienic applications.
Sanitary Control Single Seat Valve Series INNOVA G
" The INNOVA G-type valve is a pneumatic flow control single seat valve for hygienic applications. Its main function involves regulating flow, controlling pressure and level."
Sanitary Divert Single Seat Valve INNOVA L
The L type valve is a pneumatic divert single seat valve with diverging flow designed for hygienic applications. The plug is specifically designed to manage diverging flows, given that it closes against the direction of flow (inlet via the central body and outlet via the upper or lower bodies).
Sanitary Divert Single Seat Valve INNOVA K
The INNOVA K-type valve is a pneumatic divert seat valve designed for hygienic applications.
Shut-off Single Seat Valve INNOVA M
The INNOVA M-type valve is a pneumatic shut-off seat valve for hygienic applications. To avoid the effect of water hammer, the valve closes against the flow.
Shut-off Single Seat Valve INNOVA N
The INNOVA N-type valve is a pneumatic shut-off seat valve for hygienic applications. he valve is designed for the direction of product flow from the upper to the lower body
Sanitary Double Butterfly Valve LBV
Double butterfly valves can be used in most liquid product applications in the food-processing, pharmaceutical and chemical industries. The LBV (Leakage Butterfly Valve) valve offers an easy and safe separatation of products and prevents accidental mixing in case of gasket failure. The most usual applications are the ones that require safe separation of the product and CIP solutions in a single point (not in manofolds), or at the end of a manifold (e.g. CIP return) or entry of a CIP solution into a tank (through a spray ball).
Together we make it better.
For Engineers
We help you as an Engineer to improve the quality of your manufacturing process by verifying the quality of each individual valve.
For Strategic Purchasers
We help you as a Sourcing Manager or Purchaser to optimize Total Cost of Ownership, digitize QA and safeguard your brand.
For Maintenance Teams
We help you as a Maintenance Manager or Service Crew to work smarter and prevent time-consuming mistakes.